During many manufacturing process, the product should be properly protected
to prevent depreciation of the products.
Industrial surface is really diverse.
Not only the materials, but also different surface treatment,
roughness and conditions of coatings require different adhesive force,
softness of adhesive and other characteristics of protection film.
Nexus supplies broad variety of protection films which can be applied on a specific material surface.
Depending on the surface roughness and characteristics, different adhesive force can be selected from Nexus’s tape list
Thickness of 50 µ m ~250 µ m can be used for each specific process or machining
Used for various field like nameplate, PC machining, PMMA windows.
Satisfying the needs of press cutting industry
| Item | Film | Adhesive | Peel force(gf/25mm) |
Thickness(µm) |
Applications |
|---|---|---|---|---|---|
T02 |
PE |
Acrylic |
5 ± 2 |
50 | ·Cheap and efficient ·Low adhesion. Widely used for manufacturing ·ex-factory packing ·Easy peel-off ·Applicable to PMMA, PC, PET, Hard-Coating surfaces. |
| T05 | 7 ± 3 |
||||
| T10 | 10 ± 3 |
||||
T15 |
12 ± 3 |
||||
T17 |
15 ± 5 |
||||
| T20 | 15 ± 5 | ||||
| T30 | 30 ± 7 | ||||
| T100 | 150 ± 30 | ·Thin but strong adhesion. ·Mainly used for rough surface. ·Used for slippery surfaces. |
|||
| T200 | 200 ± 30 | ||||
| T300 | 300 ± 50 | ||||
| T500 | 500 ± 100 | ||||
S05 |
7 ± 3 |
80 |
·Easy to laminate, easy to peel-off ·Adhesive force can be selected based on the surface ·Heat resistance adhesive for S17, S20. |
||
S10 |
10 ± 3 |
||||
| S15 | 15 ± 5 |
||||
| S17 | 15 ± 5 |
||||
| S20 | 20 ± 5 | ||||
| S30 | 20 ± 5 |
||||
| S50 | 40 ± 10 | ||||
| S100 | 100 ± 20 | ·Strong adhesion. ·Used for rough or slippery surfaces. |
|||
| S200 | 200 ± 30 | ||||
| S300 | 300 ± 50 | ||||
| M250 | 20 ± 5 | 150 | ·Thick and low adhesion protective films. ·Specially used for ex-factory packaging. |
||
| M700 | 50 ± 10 | ||||
| M800 | 100 ± 20 | ·Used for NC machining of PMMA and PC. ·Depending on the ink features, different adhesive ·Enough stick to ink surface makes good NC |
|||
| M900 | 120 ± 30 | ||||
| M940 | 300 ± 50 | ||||
| M1000 | 700 ± 100 | ||||
| 213F | 100 ± 20 | ·Thick enough adhesive layer to give strong ·Very easy peel-off makes high working efficiency. |
|||
| 217F | 200 ± 30 | ||||
| NC200-1 | 100 ± 20 | 200 | ·Thickness of 200µm and 250µm allow easy setting on ·Used for multiple protecting layer lamination. |
||
| NC200-2 | 300 ± 50 | ||||
| NC200-3 | 600 ± 100 | ||||
| NC250-1 | 100 ± 20 | 250 | |||
| NC250-2 | 300 ± 50 | ||||
NC250-3 |
600 ± 100 |
